- Call us 01444 237070
GoPro MISSION 1 Compact Cinema Camera
Product Code: 9703453M
Share this item:
The GoPro MISSION 1 Compact Cinema Camera features a 50MP one-inch sensor, GP3 processor and 8K30 video with Open Gate recording, supporting high-resolution capture, slow motion and low-light performance in a compact, waterproof body.
Key Features
- 50MP one-inch sensor with 1.6µm native pixels and 3.2µm fused pixels
- GP3 processor with 5nm architecture and integrated neural processor
- 8K video recording at up to 30 frames per second
- 4K video recording at up to 120 frames per second
- Open Gate recording at 4K120
- 10-bit colour recording with GP-Log2 and HLG HDR
- 32-bit float audio recording with four microphones
- Waterproof design to 20 metres without housing
GoPro MISSION 1 Compact Cinema Camera Summary
The GoPro MISSION 1 Compact Cinema Camera uses the same 50MP one-inch sensor and GP3 processor as the flagship model, delivering high-resolution video, strong low-light performance and extended recording in a compact body. It sits below the MISSION 1 PRO, with a reduced set of video frame rates while maintaining the same imaging pipeline.
MISSION 1 supports up to 8K30 video, 4K120 slow motion and high-speed 1080p capture, alongside 4K120 Open Gate recording using the full sensor area. The sensor and processing combination maintains detail across highlights and shadows, with up to 14 stops of dynamic range.
The camera is waterproof to 20m without housing and supports extended recording, with over five hours at 1080p30 and more than three hours at 4K30 on a single charge. It suits filmmakers and content creators who want the same core image quality as the PRO model, with lower maximum frame rates.
GoPro MISSION 1 Compact Cinema Camera In More Detail
50MP One-Inch Sensor
The camera uses a one-inch sensor with a 50 megapixel resolution, combining 1.6µm native pixels with larger fused pixels in Quad Bayer mode. This increases light capture while maintaining detail across the frame, with support for up to 14 stops of dynamic range.
The GP3 processor is built on a 5nm architecture and includes an integrated neural processor for image processing. This supports video encoding, noise reduction and tonal balance while maintaining power efficiency during extended recording.
8K Video Capture
The MISSION 1 records 8K video at up to 30 frames per second in a 16:9 format. It shares the same imaging pipeline as the PRO model, with a lower maximum frame rate.
High Frame Rate Recording
High-speed recording includes up to 120fps at 4K and up to 240fps in 1080p. The camera does not include the higher frame rate modes available on the PRO model.
Open Gate Video Recording
Open Gate recording uses the full sensor area in a 4:3 format, supporting 4K120 capture for flexible reframing across multiple aspect ratios.
Colour and Bitrate Control
The camera supports 10-bit colour recording with GP-Log2 and HLG HDR profiles. Bitrates can reach up to 240Mbps, with timecode sync available for multi-camera workflows.
Audio Capture
Audio is recorded through a four-microphone array designed to capture stereo sound while reducing wind interference. The system supports 32-bit float recording reducing clipping, with Bluetooth connectivity for wireless audio input.
Capture Modes
The camera includes multiple capture modes tailored to different scenarios, including:
- Video
- Low Light
- Slo-Mo
- HLG HDR
- Subject Tracking
- Looping
- Endurance
Each mode adjusts processing and exposure settings to suit specific shooting conditions.
Connectivity
The camera supports Wi-Fi 6 and Bluetooth 5.3 for wireless control and data transfer. It connects to the GoPro Quik app for remote operation, media management and cloud backup.
Battery and Thermal Performance
The GP3 processor and updated battery system support extended recording times, with over five hours at 1080p30 and more than three hours at 4K30.
Waterproof Design
The camera is waterproof to 20 metres without requiring additional housing. A separate housing extends this depth further for specialised use.
Body Design
The camera uses a compact rectangular body with an integrated ultra-wide lens positioned within a squared front housing. A removable lens hood surrounds the front element, providing protection and helping reduce glare.
The outer shell features a textured finish with visible water beading, and the rounded edges maintain a low-profile shape for handheld use. A front-facing display sits alongside the lens for framing and status monitoring.
Controls and Display
A top-mounted shutter button provides direct access during handheld shooting, with a raised side power and mode button for simple operation. The rear OLED display is larger than previous models, supporting clear monitoring and playback.
Compare the GoPro MISSION 1 range in our buying guide, including key specs and differences between the PRO, PRO ILS and standard models.
Frequently asked questions
What is the difference between MISSION 1 and MISSION 1 PRO?
The MISSION 1 records up to 8K30 and 4K120, while the MISSION 1 PRO supports higher frame rates including 8K60 and 4K240.
Does the MISSION 1 support interchangeable lenses?
No, this model has a fixed lens. Interchangeable lens support is available on the MISSION 1 PRO ILS version.
What is Open Gate recording used for?
Open Gate records using the full sensor in a 4:3 format, allowing footage to be reframed into vertical, square or widescreen formats during editing.
How does the camera perform in low light?
The one-inch sensor uses larger fused pixels and supports up to 14 stops of dynamic range, helping retain detail in both shadows and highlights.
Can it be used underwater without a housing?
Yes, the camera is waterproof to 20 metres without additional housing.
Does it support professional video workflows?
Yes, it records 10-bit colour with GP-Log2, supports high bitrates up to 240Mbps and includes timecode sync for multi-camera setups.
What audio options are available?
It records using four built-in microphones with 32-bit float capture and supports wireless audio via Bluetooth.
Is this a replacement for the PRO model?
It uses the same sensor and processor but has lower maximum video frame rates and reduced Open Gate options compared to the PRO version.
Would you like to give any feedback about this page?
Complete our feedback formWriting your review
Sign In / Register
Existing Customer Login
If you are already a member, fill in the details below to login & view your account.
Condition guide
Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.
- Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
- Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
- Cameras – Should have no marks on the LCD screen
- Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
- Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes with only light signs of use and the product has been fully tested and is in great working order.
- Cameras – The LCD screen may have small signs of wear that does not affect its display
- Lenses – The mount of the lens will start to show signs of wear
- Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
- Cameras – LCD screen may have scratches or wear that is starting to affect the display.
- Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
- Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
- Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
- Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.
*All of our used items are listed with the accessories that are included. If they are not listed, then they will not be supplied at the point of purchase.
Why Buy Second Hand from Park Cameras
Park Approved Stock
Our used stock goes through a rigorous quality process. Each item is carefully inspected by our experienced specialists during the trade-in process and checked again before being listed for sale. This ensures you can shop with total peace of mind, knowing your gear has been thoroughly tested and approved.
6 Month Warranty
Shop our used gear with total confidence. Every item comes with a 6-month warranty (unless stated otherwise). Get the best brands for great value, and peace of mind all in one place. Don’t miss out — upgrade your kit today!
14 Day Returns Policy
When you purchase a Used item, you have a 14-day returns policy if the item isn’t as described. Enjoy peace of mind while getting great value on pre-owned gear!
