- Call us: 01444 237070
- Contact Us
- Stores
- Sign In / Register
DJI Mic 3 Charging Case
Product Code: 9703366A
Share this item:
The DJI Mic 3 Charging Case stores and charges up to two Mic 3 transmitters and one receiver, which extends DJI Mic 3 operating time up to 28 hours with fast charging in as little as two hours.
Trade in & Trade up
Looking to trade in your photo equipment? Get a quote now!
DJI Mic 3 Charging Case Summary
The DJI Mic 3 Charging Case is the dedicated storage and charging hub for your DJI Mic 3 system. It holds up to two transmitters and one receiver, and helps to keep your kit organised and protected while charging.
The system is perfect for creators, with a case that makes it easy to transport your microphones and accessories without worrying about losing items or tangled cables. Each transmitter can be stored with its windscreen attached, as well as either the magnet or magnetic clip, so you can pack your gear without removing any accessories. The inside of the lid also has space for storing magnets and the locking audio adapter cable.
The charging case provides around 2.4 full recharges for a complete DJI Mic 3 setup, extending total operating time to roughly 28 hours [13]. It supports fast charging, giving you up to two hours of use from just a five-minute top-up [15], and a full charge in about 50 minutes [16].
Supplied with a soft carrying pouch, it’s a practical way to protect, store, and keep your DJI Mic 3 kit ready for the next recording session.
DJI Mic 3 Charging Case Key Features
- Holds up to two transmitters and one receiver
- Provides around 2.4 full recharges for a complete DJI Mic 3 kit [13]
- Extends total operating time to approximately 28 hours [13]
- Fast charging gives up to two hours of use from a five-minute charge [15]
- Full charge takes about 50 minutes with 3C fast charging support [16]
- Stores transmitters with windscreens and clips attached for convenience
- Internal lid space for magnets and locking audio adapter cable
- Supplied with a soft carrying pouch for safe transport
Notes:
[1] When storing accessories in the charging case, avoid stacking to prevent receiver screen damage.
[13] Measured using DJI Mic 3 (2 TX + 1 RX + Charging Case) paired with a fully charged charging case, with features such as noise cancellation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable.
[15] Measured in a controlled environment with the transmitters and receiver battery levels below 25%, using a charger of 5V output, with noise cancellation off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver, and the receiver connected to a camera via the 3.5mm audio cable.
[16] Data was collected in a controlled environment and should be taken as reference only.
What’s in the box
- 1x DJI Mic 3 Charging Case
- 1x DJI Mic 3 Carrying Pouch
DJI Mic 3 Charging Case Specifications
|
Model |
DMC03 |
|
Dimensions |
106.30×42.50×59.20 mm (L×W×H) |
|
Weight |
164.1 g (charging case only) |
|
Battery Type |
Li-ion |
|
Battery Capacity |
1950 mAh |
|
Battery Energy |
7.55 Wh |
|
Battery Voltage |
3.87 V |
|
Charging Specification |
Max 5 V, 1.5-2 A |
|
Charging Temperature |
5° to 40° C (41° to 104° F) |
|
Operating Temperature |
5° to 45° C (41° to 113° F) |
|
Charging Time |
Approx. 1.5 hours |
|
Charging Cycles for TX and RX |
When charging two transmitters and one receiver simultaneously, a fully charged charging case can fully charge them for approx. 2.4 times. |
Would you like to give any feedback about this page?
Complete our feedback formWriting your review
Sign In / Register
Existing Customer Login
If you are already a member, fill in the details below to login & view your account.
Condition guide
Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.
- Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
- Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
- Cameras – Should have no marks on the LCD screen
- Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
- Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes with only light signs of use and the product has been fully tested and is in great working order.
- Cameras – The LCD screen may have small signs of wear that does not affect its display
- Lenses – The mount of the lens will start to show signs of wear
- Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
- Cameras – LCD screen may have scratches or wear that is starting to affect the display.
- Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
- Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
- Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
- Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.
*All of our used items are listed with the accessories that are included. If they are not listed, then they will not be supplied at the point of purchase.
Peace of mind with our 6 month warranty
This product has been thoroughly tested by our team of photographers and we are happy to give a 6 month warranty as a result. The number of tests depends on the individual product but we are confident in this product having tested all the major functions. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.
So you can be confident you are buying a great piece of kit that’s been looked after by a fellow photographer and seen many extraordinary sights, tested by our team of photographers and now looking forward to being set free to capture more great images!
