Insta360 Mic Pro (2 TX + 1 RX)

Insta360 Mic Pro (2 TX + 1 RX) Summary

The Insta360 Mic Pro (2 TX + 1 RX) is a dual-transmitter wireless microphone system for creators recording interviews, podcasts, presentations and multi-person video content. With two transmitters included, it supports simultaneous recording from two subjects while maintaining a compact setup suitable for cameras, mobile rigs and compatible Insta360 systems.

Each transmitter uses a three-microphone array with selectable pickup modes including omnidirectional, cardioid, figure-8 and Voice Focus recording. Internal 32GB storage on each transmitter supports standalone backup recording in 24-bit and 32-bit formats, while NPU-powered noise cancelling and automatic gain control help maintain more stable speech recording in changing environments.

This version suits creators who regularly record conversations, collaborative content or dual-presenter productions without requiring an additional transmitter later. The receiver also supports direct pairing workflows with compatible Insta360 cameras for simplified cable-free operation in supported setups.

Insta360 Mic Pro Key Features

• Two-transmitter setup for interviews and podcasts
• Customisable E-Ink transmitter display
• Three-microphone array with four pickup modes
• Voice Focus directional recording mode
• NPU-powered noise cancelling
• Automatic gain control with dual operating modes
• Three selectable voice tone presets
• Direct pairing support with compatible Insta360 cameras
• Independent internal recording on both transmitters

Insta360 Mic Pro (2 TX + 1 RX) In More Detail

Customisable E-Ink Display

Each transmitter includes a low-power E-Ink display which supports custom graphics uploaded through the Insta360 app. Logos, channel branding and simple artwork remain visible even when the transmitter is switched off, with minimal battery draw outside of display refreshes. The monochrome screen remains readable in direct sunlight and adds a visible identifier for presenters, production teams or branded content creators.

3-Mic Array

A three-microphone array within each transmitter supports multiple pickup patterns without requiring separate microphones or accessories. Omnidirectional mode captures sound evenly around the transmitter, while cardioid mode narrows focus towards the front for vlogging and direct speech recording. Figure-8 mode records from the front and rear simultaneously, which suits interviews and two-person conversations. Voice Focus mode applies adaptive beamforming to prioritise speech from the front of the transmitter in noisier environments.

Internal Recording

Both transmitters include 32GB onboard storage for direct internal recording. Recording is available in both 24-bit and 32-bit formats, with up to 60 hours of mono recording in 24-bit mode. Stereo recording is also supported, with recording times varying depending on bit depth and channel configuration. Internal recording can provide backup audio during wireless recording sessions or operate independently when a receiver is not connected.

Noise Cancelling

NPU-powered noise cancelling reduces environmental distractions during recording, particularly in outdoor locations, public spaces or untreated indoor environments. Auto Gain Control adjusts recording levels automatically based on speech intensity and surrounding conditions. Two operating modes are available depending on whether recording conditions are controlled or unpredictable, helping maintain more stable vocal levels without constant manual adjustment.

Battery Performance

The transmitters weigh 19.7g and measure 38 × 12.2mm, keeping the system compact for handheld rigs, lightweight cameras and mobile recording setups. The receiver weighs 29.8g and provides up to 11 hours of operation under standard conditions. Fast charging support allows approximately 1.5 hours of operation from a five-minute charge when using a compatible 5V/3A charger. The included charging case extends total operating time.

Timecode Support

Timecode support is included for multi-camera and synchronised audio workflows. The system supports frame rates including 23.98, 24, 25, 29.97, 30, 50 and 60fps, with offset deviation rated at less than one frame over 24 hours. LTC input and output are available through 3.5mm TRS and USB-C connections, allowing easier synchronisation during editing and post-production.

Frequently Asked Questions

Is this microphone compatible with Insta360 cameras?

Yes. The transmitter can pair directly with compatible Insta360 cameras without requiring the receiver.

Can this record audio internally without a receiver?

Yes. The transmitter includes 32GB onboard storage for standalone internal audio recording.

Is this suitable for interviews?

Yes. Figure-8 pickup mode records audio from the front and rear simultaneously, which suits two-person conversations and interviews.

How long does the battery last?

The transmitter provides up to 10 hours of operation, while the receiver provides up to 11 hours under standard test conditions.

Does it support 32-bit float recording?

Yes. Internal recording supports both 24-bit and 32-bit audio formats.

What is the difference between this version and the 1 TX kit?

This version includes two transmitters and one receiver for dual recording setups, while the 1 TX kit includes one transmitter for solo recording.

Insta360 Mic Pro Specifications

What’s in the Box

• Transmitter x2
• Receiver
• Charging Case
• Mobile Phone Adapter (USB-C)
• Button Magnet x2
• Clip x2
• Windshield x2
• Carry Pouch
• 3.5mm Camera Audio Cable
• USB-Cable
• QuickStart Guide
• Warranty Card