3 Legged Thing Punks Eddie 3 Darkness Tripod Kit with AirHed Neo 3
The 3 Legged Thing Punks Eddie 3 Darkness Tripod Kit with AirHed Neo 3 offers tall carbon fibre support, reaching 196cm with three-section legs and a 20kg load limit with the supplied head.
Pre-order today for first available UK stock. First deliveries from early Dec.
Earn 289 Park Points
Key Features
- Multi-layer 3K weave carbon fibre construction with aerospace-grade magnesium alloy fittings
- Three-section legs with 17mm minimum tube diameter for rigidity and fewer locks to operate
- Maximum height of 196cm, or 152cm with the centre column down
- Tripod rated for 24kg; supplied AirHed Neo 3 rated for 20kg
- Three removable legs, with monopod conversion reaching 203cm with the centre column and head
- Arca-Swiss compatible ball head with independent 360° panning and a 90° portrait notch
Product Summary
Quick Specs
|
Maximum Load |
Maximum Height |
Folded Length |
Maximum Monopod Height |
|
20kg with supplied head |
196cm |
61cm |
203cm with head |
The Eddie 3 in Darkness provides a working height of 152cm before you extend the centre column, rising to 196cm when you need a higher camera position. Its three-section carbon fibre legs have fewer locks to adjust and lower tubes measuring 17mm in diameter. It’s a practical choice for landscapes, astrophotography, portraits and studio photography where stability and straightforward setup take priority over a short folded length.
Built from multi-layer 3K weave carbon fibre with aerospace-grade magnesium alloy fittings, Eddie folds to 61cm and can be partially disassembled for packing. The included AirHed Neo 3 provides independent ball and panning controls, while removable legs and a reversible centre column allow low-angle setups and a monopod reaching 203cm. The tripod is rated for 24kg; with the supplied head fitted, keep your camera equipment within its lower 20kg rating.
Three-section legs for stability and quicker setup
Eddie uses three-section legs with lower tubes measuring 17mm in diameter. The supplier’s stability-focused design keeps the smallest sections relatively substantial, while fewer leg locks mean fewer adjustments when extending or packing the tripod.
The trade-off is a longer folded length. At 61cm, Eddie is better suited to photographers who put working height and setup speed ahead of the smallest possible packed size. The legs counter-fold around the head using the redesigned Tri-Mount Plate, and the components can be partially disassembled for transportation.
Tall support with the centre column down
The legs alone provide a maximum working height of 152cm without extending the centre column. This gives you a useful choice: keep the column down for a lower camera position, or extend the single-section column when you need the full 196cm height.
Independent leg positioning helps you set up on uneven ground. Choose from 23°, 55° and 80° leg angles to adjust the stance, including wider positions for lower viewpoints.
Tripod, monopod and low-angle configurations
Eddie’s removable legs and centre column let you adapt the support to different subjects and working spaces.
- Standard tripod: Use the three-section legs and single-section centre column for conventional camera support up to 196cm.
- Full-size monopod: Combine one of the three removable legs with the centre column and AirHed to reach 203cm. This provides support with a smaller footprint when following moving subjects or working in confined spaces.
- Low-angle and macro setup: Spread the legs wider and remove the centre column for a minimum height of 21cm in this configuration. Alternatively, reverse the column to position the camera below the canopy for close-to-ground compositions.
- Tabletop conversion: Remove all three legs and fit compatible optional footwear directly to the canopy to create a compact support. Conversion footwear is sold separately.
AirHed Neo 3 camera positioning and load capacity
The AirHed Neo 3 has separate controls for ball positioning, panning and the quick release clamp. Adjust the camera angle independently of the panning base, rotate through 360° for horizontal framing adjustments, or use the 90° side notch for portrait-orientation shots.
Its Arca-Swiss compatible twist clamp holds the supplied quick release plate, which attaches to your camera using a 1/4″-20 screw. Eddie’s tripod is rated for 24kg, but the supplied head is rated for 20kg. Keep the combined weight of your camera, lens and mounted accessories within the lower 20kg limit when using this kit with the AirHed Neo 3.
Comfortable adjustments and accessory attachment
Knurled magnesium alloy leg and centre column locks combine with rubber grip pads to provide grip and leverage when extending or collapsing the tripod. Bubble levels on the canopy and head help you check alignment, while a D-ring beneath the centre column provides an attachment point for additional ballast.
An integrated 1/4″-20 canopy thread provides an attachment point for a compatible accessory or support arm, keeping the camera mounting position free. A built-in female QD socket supports compatible AXIS camera straps and other suitable Quick Disconnect accessories.
Interchangeable footwear
Eddie comes with Rubber Bootz feet for general use. These can be unscrewed and exchanged for compatible alternative footwear using the 1/4″-20 foot threads, allowing you to choose feet suited to the surface you’re working on. Alternative footwear is sold separately.
Frequently Asked Questions
Will it fit my camera?
The supplied quick release plate attaches to cameras with a standard 1/4″-20 tripod socket. With the AirHed Neo 3 fitted, the combined weight of your camera, lens and mounted accessories must remain within the head’s 20kg rating.
Can I use my existing Arca-Swiss plate or L-bracket?
The AirHed Neo 3 has an Arca-Swiss compatible twist clamp, allowing a compatible plate or L-bracket to mount directly. Check the fit of your particular plate or bracket, including any safety stops, before use.
Will it fit inside my travel bag?
Its folded length is 61cm. Compare this with your bag’s usable internal space, allowing room for the head and other equipment. The components can be partially disassembled for packing, but the supplier does not specify a disassembled length.
Can I replace the supplied ball head?
Yes. The AirHed Neo 3 is removable and uses a 3/8″-16 female base connection. Choose a replacement head with a compatible mounting connection and a suitable load capacity for your equipment. The tripod’s maximum load remains 24kg.
Specifications
|
Model |
Punks Eddie 3 |
|
Colour |
Blue |
|
Tripod material |
Multi-layer 3K weave carbon fibre with aerospace-grade magnesium alloy fittings |
|
Tripod maximum load |
24kg |
|
Load limit with supplied head |
20kg, based on the AirHed Neo 3 rating |
|
Maximum height |
196cm |
|
Minimum height |
24cm |
|
Maximum height without centre column |
152cm |
|
Minimum height without centre column |
21cm |
|
Folded length |
61cm |
|
Tripod weight |
1.39kg |
|
Leg sections |
3 |
|
Minimum leg tube diameter |
17mm |
|
Centre column sections |
1 |
|
Leg locks |
Twist locks |
|
Leg angles |
23°, 55° and 80° |
|
Independent leg spread |
Yes |
|
Removable legs |
3 |
|
Detachable leg height with head |
153cm |
|
Detachable leg and centre column height with head |
203cm |
|
Detachable leg folded length with head |
63cm |
|
Feet |
Rubber Bootz |
|
Foot thread |
1/4″-20 |
|
Canopy accessory thread |
1/4″-20 |
|
QD attachment |
Built-in female QD socket |
|
Supplied head |
AirHed Neo 3 ball head |
|
Head material |
Aerospace-grade magnesium alloy |
|
Head maximum load |
20kg |
|
Head height |
80mm |
|
Head base diameter |
43mm |
|
Head weight |
276g |
|
Head base mount |
3/8″-16 female |
|
Quick release system |
Arca-Swiss compatible twist clamp |
|
Quick release plate |
QD Arca-Swiss compatible plate |
|
Camera mounting screw |
1/4″-20 |
|
Ball diameter |
36mm |
|
Panning range |
360° |
|
Portrait notch |
90° |
|
Head controls |
Clamp knob, ball control lock and panning knob |
|
Bubble levels |
2: one on the tripod and one on the head |
|
Warranty |
5-year global warranty |
What's in the Box
- Punks Eddie 3 Darkness carbon fibre tripod
- AirHed Neo 3 quick release ball head
- QD Arca-Swiss compatible quick release plate
- Toolz multitool with hex keys
- Microfibre head bag
- Protective clamshell carry bag with grab handle and detachable, extendable shoulder strap
Would you like to give any feedback about this page?
Complete our feedback formWriting your review
Sign In / Register
Existing Customer Login
If you are already a member, fill in the details below to login & view your account.
Condition guide
Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.
- Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
- Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
- Cameras – Should have no marks on the LCD screen
- Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
- Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes with only light signs of use and the product has been fully tested and is in great working order.
- Cameras – The LCD screen may have small signs of wear that does not affect its display
- Lenses – The mount of the lens will start to show signs of wear
- Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
- Cameras – LCD screen may have scratches or wear that is starting to affect the display.
- Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
- Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
- Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
- Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.
*All of our used items are listed with the accessories that are included. If they are not listed, then they will not be supplied at the point of purchase.
Why Buy Second Hand from Park Cameras
Park Approved Stock
Our used stock goes through a rigorous quality process. Each item is carefully inspected by our experienced specialists during the trade-in process and checked again before being listed for sale. This ensures you can shop with total peace of mind, knowing your gear has been thoroughly tested and approved.
Upto 12 Month Warranty
Shop our used gear with total confidence. Every item comes with upto a 12-month warranty (unless stated otherwise). Get the best brands for great value, and peace of mind all in one place. Don’t miss out — upgrade your kit today!
14 Day Returns Policy
When you purchase a Used item, you have a 14-day returns policy if the item isn’t as described. Enjoy peace of mind while getting great value on pre-owned gear!