- Call us: 01444 237070
- Contact Us
- Stores
- Sign In / Register
Ewa Marine Ewa-Marine U-BXP for EOS 6D
This product is no longer available
Product Code: 6119999C
Share this item:
Ewa-Marine U-BXP for EOS 6D
Sell or Trade-in
Looking to trade in your photo equipment? Get a quote now!
The housing can be used on small boats, in the surf, while swimming, snorkeling or diving. It`s easy to operate as the camera as its various components and buttons can be operated through the PVC.
The U-BXP is specially designed to fit the bulky, professional digital SLR cameras like the EOS 1D, 1Ds series, or the Nikon D300, D800, D3, D4 und Canon 5D Mark II, 5D Mark III, EOS 1DX and similar cameras. Smaller SLR cameras then the mentioned above can still be used in the housing.
please note: In this housing you can only use lenses till a maximum filterthread diameter of 72mm. If you are using lenses with a 77mm or a 82mm filterthread, then you must use the U-BXP100 housing.
With this housing, a whole new world of applications opens up for your professional digital SLR camera: Inside the housing you can now take the camera safely canoeing, snorkeling or even diving, up to a depth of 50 m / 150 ft.
If the optional BF1 lead weight is inserted into the housing, underneath the camera, it becomes even easier to reach the maximum depth. Experienced photographers have confirmed, that the auto focus and flash both continue to function perfectly. As you descend, the air is pressed into the camera. Due to this, the pressure inside the housing will remain the same as the surrounding water pressure. (this is the reason why ewa-marine housings are so safe to use: implosions are impossible) Due to this, we have to start the dive with a suitable amount of air inside the housing. The foam pads supplied with the housing are part of this air "reservoir" and additional air should also be blown into the housing, via the valve at the rear, to ensure that the maximum potential volume is being utilised.
The U-BXP housing is manufactured from double laminated PVC and has an integrated, optically neutral flat glass port. The external flash that is commonly used on SLR cameras fits into the specially designed section on the top of the housing.
It has a pair of non-corrosive and seawater resistant clamping rails which fit together for perfect sealing. They tighten by means of three screw knobs.
It is supplied in a handy yellow carry-case which has a water-proof interior.
Would you like to give any feedback about this page?
Complete our feedback formWriting your review
Sign In / Register
Existing Customer Login
If you are already a member, fill in the details below to login & view your account.
Condition guide
Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.
- Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
- Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
- Cameras – Should have no marks on the LCD screen
- Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
- Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes with only light signs of use and the product has been fully tested and is in great working order.
- Cameras – The LCD screen may have small signs of wear that does not affect its display
- Lenses – The mount of the lens will start to show signs of wear
- Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
- Cameras – LCD screen may have scratches or wear that is starting to affect the display.
- Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
- Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
- Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
- Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.
*All of our used items are listed with the accesories that are included. If they are not listed then they will not be supplied at eh epoint of purchase.
Peace of mind with our 6 month warranty
This product has been thoroughly tested by our team of photographers and we are happy to give a 6 month warranty as a result. The number of tests depends on the individual product but we are confident in this product having tested all the major functions. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.
So you can be confident you are buying a great piece of kit that’s been looked after by a fellow photographer and seen many extraordinary sights, tested by our team of photographers and now looking forward to being set free to capture more great images!
