Call us: 01444 237070

Sonnet Presto Solo 10GBASE-T Ethernet 1-Port PCIe Card Thunderbolt

Sonnet Presto Solo 10GBASE-T Ethernet 1-Port PCIe Card Thunderbolt

Product Code: S334434A

Share this item:

The Sonnet Presto Solo 10GBASE-T Ethernet 1-Port PCIe Card Thunderbolt compatible enables you to connect your computer to high-speed 10GbE infrastructure via inexpensive CAT 6 cabling.

FREE delivery

£172.80

Earn 173 Park Points

Sell or Trade-in

Looking to trade in your photo equipment? Get a quote now!

Reasons to buy from Park Cameras

Solo 10G PCIe Card

With recent advances in technology, plus increasingly affordable gear, the transition to capturing and outputting content at 4K and higher resolutions has happened fast—the need for faster than Gigabit Ethernet speeds to transfer all that data has accelerated equally fast. For post-production shared storage workgroups and other bandwidth-intensive workflows, 10Gb Ethernet is the new data transfer standard. Speeding its adoption, very affordable 10Gb Ethernet switches with RJ45 (copper) have significantly reduced the cost of setting up 10GbE infrastructure, but the price of adding client connectivity has remained a barrier for some. Now, there is an equally affordable 10Gb Ethernet interface for your desktop and workstation computers—Sonnet’s Solo10G™ PCIe Card, a powerfully simple solution for adding blazing-fast 10GBASE-T 10GbE network connectivity to Mac®, Windows®, and Linux® computers at a price that’s sure to please.

The Solo 10G PCIe Card is equipped with a single RJ45 socket, enabling you to connect your computer to 10GbE infrastructure via inexpensive CAT 6 cabling at distances up to 55 meters, or CAT 6A cabling at up to 100 meters.


Faster Transfers Across Existing Cabling Made Possible with NBASE-T Technology

Does your facility have CAT 5e wiring installed already? You can still get a great performance gain—up to 500 percent over Gigabit Ethernet speed—without rewiring! The Solo 10G PCIe Card supports the NBASE-T™ standard of 2.5/5 Gb link speeds over CAT 5e (or better) cabling when used with a Multi-Gigabit switch or router. This capability allows you to deploy the same card across an organization for users supported by different Ethernet cabling infrastructures.


Advanced Feature Support

The Solo 10G PCIe Card’s high throughput performance and low host-CPU utilization are attained through functions such as flow control, 64-bit address support for systems using more than 4GB of physical memory; and stateless offloads such as TCP, UDP and IPv4 checksum offloading. These processes enable your computer to perform better while large files transfers or high I/O operations take place.


Simple Setup

How simple? Install the Solo 10G PCIe Card in your computer or Thunderbolt expansion system, connect to the network switch or directly to 10GbE-enabled storage, and configure the card’s settings through operating system network device configuration tools.


AVB Support

Audio Video Bridging (IEEE 802.1Qav, AVB) support makes the Solo 10G card perfect for use in pro audio and video applications where synchronization of data streams is critical.


Includes Two Mounting Brackets

The Solo 10G PCIe Card is packaged with both full-height and low-profile mounting brackets, enabling installation of the card into any PCIe slot.


Optimized for Thunderbolt

Got a Thunderbolt connection, but no PCIe slot? Solo10G PCIe Card is ideal for use in one of Sonnet’s Echo™ Express or xMac™ Thunderbolt-to-PCIe card multi-slot expansion systems—the combo enables you to add an ultra-fast 10GbE network connection to any Mac® with Thunderbolt 2 or Thunderbolt 3 ports, or Windows PC with Thunderbolt 3 ports. You may also want to consider Sonnet’s Solo 10G Thunderbolt 3 Edition adapter—it’s compact, rugged, and bus-powered, and perfect for use with Mac and Windows computers with Thunderbolt 3.


Perfect for the Extra Slot in Your Multi-Slot Thunderbolt Chassis

Have a multi-slot Thunderbolt 2 or Thunderbolt 3 to PCIe card expansion chassis with an open slot? Installing a Solo 10G PCIe Card is an excellent way to inexpensively add 10GbE connectivity to your computer.

  •     Adds 10GBASE-T 10GbE Connectivity - Adds an RJ45 10 Gigabit Ethernet port to your computer with PCIe slots
  •     Cost-Effective - Low-cost PCIe card connects to 10GbE infrastructure via inexpensive CAT 6 or CAT 6A cables at distances up to 55 or 100 meters, respectively
  •     Features NBASE-T Technology - 5 Gb/s and 2.5 Gb/s speeds supported over existing CAT 5e (or better) cabling at distances up to 100 meters(1)
  •     Supports AVB(2) - Audio Video Bridging (IEEE 802.1Qav, AVB)
  •     Optimized for Thunderbolt - Ideal for use in Sonnet’s Echo™ Express and xMac™ Thunderbolt-to-PCIe card expansion systems
  •     Easy Setup - Configure using your computer’s operating system network device configuration tools

Techincal Notes

    2.5G/5G speeds are supported when used with NBASE-T compatible (multi-Gigabit) switches.
    Switch/router must support AVB to support this feature.

IN THE BOX:

  •     1 x Solo 10G PCIe Card
  •     Two mounting brackets (full-height and low-profile)
  •     Documentation

Would you like to give any feedback about this page?

Complete our feedback form

Writing your review

Added to basket

x

Condition guide

Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.

  • Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
  • Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
    • Cameras – Should have no marks on the LCD screen
    • Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
  • Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes  with only light signs of use and the product has been fully tested and is in great working order.
    • Cameras – The LCD screen may have small signs of wear that does not affect its display
    • Lenses – The mount of the lens will start to show signs of wear
  • Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
    • Cameras – LCD screen may have scratches or wear that is starting to affect the display.
    • Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
  • Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
    • Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
    • Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.

*All of our used items are listed with the accesories that are included. If they are not listed then they will not be supplied at eh epoint of purchase.

Used team

Peace of mind with our 6 month warranty

This product has been thoroughly tested by our team of photographers and we are happy to give a 6 month warranty as a result. The number of tests depends on the individual product but we are confident in this product having tested all the major functions. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.

So you can be confident you are buying a great piece of kit that’s been looked after by a fellow photographer and seen many extraordinary sights, tested by our team of photographers and now looking forward to being set free to capture more great images!

Trade in your old equipment

Fast and easy trade in service ensures your old gear is collected efficiently and you are paid quickly! It's very simple to trade in your unwanted photography gear. Just head over to our dedicated Sell or Part Exchange page, fill out the details, and we'll get back to you with an offer for your old gear. Take the cash, or put it towards the cost of your new gear. It's up to you! Find out more

sign up to the newsletter

Keep up to date on the latest photography news, events and offers. Sign up now

follow us on social media