Call us: 01444 237070

Benro Series 3 3-Section Carbon Fibre Single Leg Video Tripod Kit (S7 Head)

This product is no longer available

Benro Series 3 3-Section Carbon Fibre Single Leg Video Tripod Kit (S7 Head)

Product Code: 6377020T

Share this item:

Spread the cost

Pay £ per month for months. Deposit amount £ , % APR

Sell or Trade-in

Looking to trade in your photo equipment? Get a quote now!

Reasons to buy from Park Cameras

Benro C373FBS7 Series 3 Carbon Fibre 3 Section Single Leg Video Tripod with S7 Head Kit

  • 15.4 lb Load Capacity
  • Flat Base Head with Half Ball Adapter
  • 4-Step Counterbalance
  • Continuous Pan Drag
  • Independent Pan and Tilt Locks
  • Manfrotto 501/504PL Type Sliding Plate
  • 3-Stage Carbon Fiber Legs
  • 11.6" to 63.58" Height Range
  • Flip-Lock Leg Release
  • Screw-In Rubber and Spiked Feet

The Benro S7 Tripod Kit with A373F Carbon Fiber Legs is designed to support camera rigs weighing up to 15.4 pounds. The kit pairs the S7 Video Head with the 2-stage, 3-section A373F Series 3 carbon fiber tripod. The head attaches to the tripod using a 75mm bowl adapter features a 75mm half ball adapter, which can be removed attaching directly to tripods, monopods, sliders, and other camera support equipment with a 3/8"-16 threaded stud. The system has a maximum height of 63.58", a minimum height of 11.6", and weighs 7.5 pounds. A carrying case is included for convenient transport and storage.

The head features a 4-step counterbalance system to help you counter the weight of your camera or heavy lens, and continuous pan drag adjustment, so you can dial in the right amount of tension for each shot. The pan and tilt locks operate independently of each other and are located on the operator side of the head for easy access and control. The head has tilt range of -50° to +90°. Your camera attaches to the S7 head via an included Manfrotto 501/504PL compatible sliding quick-release plate. Also included is an adjustable length pan bar handle, which can be mounted on either side of the head. Additional features include an illuminated bubble level and two 3/8"-16 threads for attaching optional accessories such as a monitor or recorder.

The A3573F Series 3 carbon fiber tripod legs features a 2-stage design, with three sections that are secured using flip-lock levers. The legs feature a spreader-less design with three discreet stops for locking them at different degrees of spread. In addition, they can be opened fully for low-angle shooting. For a secure grip on virtually any surface, the tripod has screw-in rubber feet can be easily swapped out with included spiked feet.

Head

  • Supports up to 15.4 lb
  • 65mm flat base with 3/8"-16 thread
  • 75mm half ball
  • 4-step (0-3) counterbalance: 0 lb, 5.0 lb, 10 lb, 15.4 lb
  • Continuous pan drag
  • Independent pan and tilt locks
  • Tilt Range: -50°/+90°
  • Manfrotto 501/504PL compatible sliding plate
  • Two 3/8"-16 accessory threads for mounting accessories, such as monitor or recorder
  • Illuminated bubble level
  • Adjustable length pan bar

Legs

  • 2-stage, 3-section carbon fiber tripod with 75mm bowl fitting
  • Flip lock levers
  • Three leg angles
  • Screw-in rubber and spiked feet
  • Max height: 63.58" (with S7 head attached)
  • Min height: 11.6" (with S7 head attached)

Would you like to give any feedback about this page?

Complete our feedback form

Writing your review

Added to basket

x

Condition guide

Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.

  • Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
  • Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
    • Cameras – Should have no marks on the LCD screen
    • Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
  • Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes  with only light signs of use and the product has been fully tested and is in great working order.
    • Cameras – The LCD screen may have small signs of wear that does not affect its display
    • Lenses – The mount of the lens will start to show signs of wear
  • Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
    • Cameras – LCD screen may have scratches or wear that is starting to affect the display.
    • Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
  • Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
    • Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
    • Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.

*All of our used items are listed with the accesories that are included. If they are not listed then they will not be supplied at eh epoint of purchase.

Used team

Peace of mind with our 6 month warranty

This product has been thoroughly tested by our team of photographers and we are happy to give a 6 month warranty as a result. The number of tests depends on the individual product but we are confident in this product having tested all the major functions. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.

So you can be confident you are buying a great piece of kit that’s been looked after by a fellow photographer and seen many extraordinary sights, tested by our team of photographers and now looking forward to being set free to capture more great images!

Trade in your old equipment

Fast and easy trade in service ensures your old gear is collected efficiently and you are paid quickly! It's very simple to trade in your unwanted photography gear. Just head over to our dedicated Sell or Part Exchange page, fill out the details, and we'll get back to you with an offer for your old gear. Take the cash, or put it towards the cost of your new gear. It's up to you! Find out more

sign up to the newsletter

Keep up to date on the latest photography news, events and offers. Sign up now

follow us on social media