Call us: 01444 237070

Nikon WR-1 Wireless Remote Controller for D Series

This product is no longer available

Nikon WR-1 Wireless Remote Controller for D Series

Product Code: 3300212C

Share this item:

Nikon's WR-1 advanced multifunctional Wireless Remote Controller lets you control key camera functions from a distance. Built in display allows for advanced function configuration and camera menu control and changes.

Spread the cost

Pay £ per month for months. Deposit amount £ , % APR

Sell or Trade-in

Looking to trade in your photo equipment? Get a quote now!

Reasons to buy from Park Cameras

WR-1 Wireless Remote Controller

Nikon's WR-1 advanced multifunctional Wireless Remote Controller lets you control key camera functions from a distance. Built in display allows for advanced function configuration and camera menu control and changes.

The WR-1 Wireless Remote Controller is part of the Nikon Wireless Remote Control system, which uses radio frequencies to communicate instead of infrared signal which requires direct line of sight, extending the capabilities and reach possible when photographers need the ability to control cameras remotely. The WR-1 Wireless Remote Controller can act as either a transmitter or receiver unit; and is compatible with the WR-T10 transmitters and WR-R10 transceivers. The WR-1 is compatible with the WR-T10 & R10 as long as the WR-1 is set to Group A, as the WR-R10/WR-T10 system is fixed on Group A.


Key Features:

Photographers can use the WR-1 to simultaneously release the shutter on multiple Nikon D-SLR cameras that have a WR-R10 and/or WR-1 units attached and have been paired with it. Likewise, the WR-1 can be used as a transceiver, to be controlled by a WR-T10 that is paired with it. The WR-1 is compatible with the WR-T10 & R10 as long as the WR-1 is set to Group A as the WR-R10/WR-T10 system is fixed on Group A.

The WR-1 has access to 15 radio frequency channels (1-15), to prevent interference when multiple pairings or photographers are shooting in one location. Using the WR-1 display, you can even visualize the traffic in each of the 15 channels and select the one with the least amount of traffic to minimize interference.

The WR-1 can be designated as a "master" and control the shutters of up to 20 WR-1 units, or 64 WR-R10 units. The WR-1 is compatible with the WR-T10 & R10 as long as the WR-1 is set to Group A as the WR-R10/WR-T10 system is fixed on Group A.

When using the release delay mode on the WR-1 transceiver, different delays can be used for different receivers, allowing the shutter release to be staggered over a series of cameras using a single transmitter.

When connected to a D Series D-SLR, the Fn button on the WR-1 has full control of the features that the camera's Fn button controls.

Comes with a soft case, MC-37 Connecting Cord (for ten-pin remote terminals) and MC-38 Connecting Cord (for accessory terminals).

Up to 20 WR-1 units can be used at one time (including 3 transmitters).

The WR-1 also can access up to four groups (A, B, C, D), to further separate out groups of cameras that need to be controlled independently and simultaneously.

Useful for triggering the shutter remotely when using slower shutter speeds (up to 60 minutes) for long exposure photography, to prevent camera movement as well as when shooting interval timer photography.

Range (line of sight) from a WR-1 to another WR-1 is approx.. 394 ft.

When connected to a camera as a transceiver, the WR-1 must be connected to the D-SLR using either an MC-37 or MC-38 cable.

When connected to a D Series D-SLR, the photographer can view and change camera settings remotely on the camera using the LCD information display on the WR-1.

Would you like to give any feedback about this page?

Complete our feedback form

Writing your review

Added to basket

x

Condition guide

Our used products are subject to wear and tear in comparison to brand new products. This also applies to accessories that are supplied with the camera including batteries which may have a lower optimum performance level/life expectancy.

  • Like New – The equipment is in a condition as if you have just bought it from the manufacturer. The item is still considered to be ‘Like New’ even without the original packaging and accessories. The product has been fully tested and is in perfect working order. Lenses are optically clear. There may be light dust present that will not effect the imagery.
  • Excellent – The equipment should be close to being ‘Like New’ but there may be some small cosmetic blemishes that lower its grade. The product has been fully tested and is in perfect excellent order.
    • Cameras – Should have no marks on the LCD screen
    • Lenses – Should have no marks on the elements and optically clear. There may be light dust present that will not effect the imagery.
  • Very Good – The equipment may have some slight cosmetic wear to the paintwork and cosmetic blemishes  with only light signs of use and the product has been fully tested and is in great working order.
    • Cameras – The LCD screen may have small signs of wear that does not affect its display
    • Lenses – The mount of the lens will start to show signs of wear
  • Good – The equipment is showing more obvious signs of cosmetic wear and blemishes, but the product has been fully tested and is in great working order.
    • Cameras – LCD screen may have scratches or wear that is starting to affect the display.
    • Lenses – May have slight dust inside that does not affect images. The mount shows signs of use.
  • Well Used – The equipment will show significant signs of wear. The paintwork will be coming away in large areas exposing the metal work, but the product has been fully tested and is in great working order.
    • Cameras – LCD screen is heavily worn either by de-lamination or has scratches to it. Rubber grips are starting to come away from the body.
    • Lenses – The lens has dust inside that may affect images. The rubber zoom/focus ring is coming away from the barrel of the lens.

*All of our used items are listed with the accesories that are included. If they are not listed then they will not be supplied at eh epoint of purchase.

Used team

Peace of mind with our 6 month warranty

This product has been thoroughly tested by our team of photographers and we are happy to give a 6 month warranty as a result. The number of tests depends on the individual product but we are confident in this product having tested all the major functions. Anything that isn’t as you would expect, we then make a note of and show this in the condition notes on the page.

So you can be confident you are buying a great piece of kit that’s been looked after by a fellow photographer and seen many extraordinary sights, tested by our team of photographers and now looking forward to being set free to capture more great images!

Trade in your old equipment

Fast and easy trade in service ensures your old gear is collected efficiently and you are paid quickly! It's very simple to trade in your unwanted photography gear. Just head over to our dedicated Sell or Part Exchange page, fill out the details, and we'll get back to you with an offer for your old gear. Take the cash, or put it towards the cost of your new gear. It's up to you! Find out more

sign up to the newsletter

Keep up to date on the latest photography news, events and offers. Sign up now

follow us on social media